SDI-bridge/sdi-bridge.ps1

# ============================================================
#  SDI Bridge Orchestrator
#  - Checks FFmpeg build (must be with --enable-decklink)
#  - Reads Blackmagic driver version from registry
#  - Detects DeckLink channels
#  - Reads streams.txt
#  - Stops any previously running workers
#  - Launches one worker.cmd per stream in a separate window
# ============================================================

# --- Config ---
$FFmpeg       = 'C:\sdi-bridge\ffmpeg.exe'
$StreamsFile  = 'C:\sdi-bridge\streams.txt'
$WorkerScript = 'C:\sdi-bridge\worker.cmd'
$StopFlag     = 'C:\sdi-bridge\STOP.flag'

# --- Helper: run native command and capture stdout+stderr ---
function Invoke-Native {
    param([string] $Exe, [string[]] $Arguments)
    $prev = $ErrorActionPreference
    $ErrorActionPreference = 'Continue'
    try   { $out = & $Exe @Arguments 2>&1 | Out-String }
    finally { $ErrorActionPreference = $prev }
    return $out
}

# ============================================================
#  0. Sanity checks: ffmpeg exists, supports DeckLink
# ============================================================
if (-not (Test-Path $FFmpeg)) {
    Write-Host "ERROR: ffmpeg.exe not found: $FFmpeg" -ForegroundColor Red
    exit 1
}

Write-Host 'Checking FFmpeg build...' -ForegroundColor Cyan
$versionOut = Invoke-Native -Exe $FFmpeg -Arguments @('-hide_banner', '-version')

if ($versionOut -notmatch '--enable-decklink') {
    Write-Host 'ERROR: this FFmpeg build was compiled WITHOUT DeckLink support.' -ForegroundColor Red
    Write-Host '       Look for a build with --enable-decklink in its configuration.' -ForegroundColor Red
    Write-Host '       Current build configuration:' -ForegroundColor DarkGray
    Write-Host $versionOut
    exit 1
}
Write-Host 'FFmpeg build OK (DeckLink enabled).' -ForegroundColor Green

# ============================================================
#  0b. Blackmagic driver version (from registry)
# ============================================================
function Get-BlackmagicDriverVersion {
    $candidates = @(
        @{ Path = 'HKLM:\SOFTWARE\Blackmagic Design\Desktop Video';                        Name = 'Version' },
        @{ Path = 'HKLM:\SOFTWARE\Blackmagic Design\Desktop Video';                        Name = 'DriverVersion' },
        @{ Path = 'HKLM:\SOFTWARE\WOW6432Node\Blackmagic Design\Desktop Video';            Name = 'Version' },
        @{ Path = 'HKLM:\SOFTWARE\WOW6432Node\Blackmagic Design\Desktop Video';            Name = 'DriverVersion' }
    )
    foreach ($c in $candidates) {
        try {
            $val = Get-ItemProperty -Path $c.Path -Name $c.Name -ErrorAction Stop
            if ($val.$($c.Name)) { return $val.$($c.Name) }
        } catch { }
    }
    # Fallback: look for the "Decklink" driver under Display adapters / Sound
    try {
        $drv = Get-CimInstance Win32_PnPSignedDriver -ErrorAction Stop |
               Where-Object { $_.DeviceName -match 'Blackmagic|DeckLink' } |
               Select-Object -First 1
        if ($drv -and $drv.DriverVersion) { return $drv.DriverVersion }
    } catch { }
    return $null
}

$bmVersion = Get-BlackmagicDriverVersion
if ($bmVersion) {
    Write-Host ("Blackmagic driver: {0}" -f $bmVersion) -ForegroundColor Green
} else {
    Write-Host 'Blackmagic driver: version not detected (registry key missing)' -ForegroundColor DarkYellow
}

# ============================================================
#  1. Detect DeckLink channels
# ============================================================
Write-Host 'Detecting DeckLink channels...' -ForegroundColor Cyan
$sinks = Invoke-Native -Exe $FFmpeg -Arguments @('-hide_banner', '-sinks', 'decklink')

$matches = [regex]::Matches($sinks, '\[([^\]]+?)\s*\((\d+)\)\]')
$found = @()
foreach ($m in $matches) {
    $found += [PSCustomObject]@{
        Number = [int]$m.Groups[2].Value
        Name   = $m.Groups[1].Value.Trim()
    }
}

if ($found.Count -eq 0) {
    Write-Host 'ERROR: No DeckLink channels detected.' -ForegroundColor Red
    Write-Host '--- Raw output from ffmpeg -sinks decklink ---' -ForegroundColor DarkGray
    Write-Host $sinks
    exit 1
}

# Deduplicate + force sort by number, store as plain int array
$channelNumbers = @($found | Sort-Object Number -Unique | ForEach-Object { $_.Number })
$cardName       = ($found | Select-Object -First 1).Name -replace '\s*\(\d+\)$',''

Write-Host ("Card:     {0}" -f $cardName) -ForegroundColor Green
Write-Host ("Channels: {0}" -f ($channelNumbers -join ', ')) -ForegroundColor Green

# ============================================================
#  2. Read streams file
# ============================================================
if (-not (Test-Path $StreamsFile)) {
    Write-Host "ERROR: streams file not found: $StreamsFile" -ForegroundColor Red
    exit 1
}

$lines = Get-Content $StreamsFile |
         ForEach-Object { $_.Trim() } |
         Where-Object { $_ -and -not $_.StartsWith('#') }

if ($lines.Count -eq 0) {
    Write-Host "ERROR: no streams in $StreamsFile" -ForegroundColor Red
    exit 1
}

Write-Host ("Loaded {0} stream line(s), {1} channel(s) available" -f $lines.Count, $channelNumbers.Count) -ForegroundColor Green

if ($lines.Count -gt $channelNumbers.Count) {
    Write-Host ("WARNING: {0} stream(s) will be skipped (not enough channels)" -f ($lines.Count - $channelNumbers.Count)) -ForegroundColor Yellow
}

# ============================================================
#  3. Build assignment: channel -> url
# ============================================================
$usedChannels = @{}
$assignments  = @()
$skipped      = @()

foreach ($line in $lines) {
    if ($line -match '^(\d+)\s*:\s*(.+)$') {
        # Explicit channel: "3:rtsp://..."
        $ch  = [int]$matches[1]
        $url = $matches[2].Trim()
        if (-not ($channelNumbers -contains $ch)) {
            Write-Host "  SKIP: channel $ch not present -> $url" -ForegroundColor Yellow
            $skipped += $line
            continue
        }
        if ($usedChannels.ContainsKey($ch)) {
            Write-Host "  SKIP: channel $ch already taken -> $url" -ForegroundColor Yellow
            $skipped += $line
            continue
        }
    } else {
        # Auto-assign next free channel
        $ch  = $null
        $url = $line
        foreach ($c in $channelNumbers) {
            if (-not $usedChannels.ContainsKey($c)) { $ch = $c; break }
        }
        if ($null -eq $ch) {
            Write-Host "  SKIP: no free channels left -> $url" -ForegroundColor Yellow
            $skipped += $line
            continue
        }
    }

    $assignments += [PSCustomObject]@{ Channel = $ch; Url = $url }
    $usedChannels[$ch] = $true
}

if ($assignments.Count -eq 0) {
    Write-Host 'ERROR: no valid assignments could be made.' -ForegroundColor Red
    exit 1
}

# ============================================================
#  4. Cleanup: stop any previously running workers
# ============================================================
Write-Host ''
Write-Host 'Cleaning up previous workers...' -ForegroundColor Cyan

# 4a. Signal all workers to stop
New-Item -Path $StopFlag -ItemType File -Force | Out-Null

# 4b. Kill ffmpeg so workers unblock and see the flag
Get-Process ffmpeg -ErrorAction SilentlyContinue |
    Stop-Process -Force -ErrorAction SilentlyContinue
Start-Sleep -Seconds 2

# 4c. Kill any leftover worker cmd windows by their title
Get-Process cmd -ErrorAction SilentlyContinue |
    Where-Object { $_.MainWindowTitle -like 'SDI-*' } |
    Stop-Process -Force -ErrorAction SilentlyContinue
Start-Sleep -Milliseconds 500

# 4d. Remove the flag so new workers can start normally
Remove-Item $StopFlag -ErrorAction SilentlyContinue

Write-Host 'Cleanup complete.' -ForegroundColor DarkGray

# ============================================================
#  5. Launch workers in separate cmd windows
# ============================================================
Write-Host ''
Write-Host 'Launching workers:' -ForegroundColor Cyan

$table = @()
foreach ($a in ($assignments | Sort-Object Channel)) {
    $argLine = "/k `"`"$WorkerScript`" $($a.Channel) `"$($a.Url)`" `"$cardName`"`""
    Start-Process -FilePath 'cmd.exe' -ArgumentList $argLine | Out-Null
    $table += [PSCustomObject]@{
        SDI     = "SDI-$($a.Channel)"
        Stream  = $a.Url
        Status  = 'launched'
    }
}

# ============================================================
#  6. Summary
# ============================================================
Write-Host ''
$table | Format-Table -AutoSize | Out-String | Write-Host

Write-Host ("Launched: {0}" -f $assignments.Count) -ForegroundColor Green
if ($skipped.Count -gt 0) {
    Write-Host ("Skipped:  {0}" -f $skipped.Count) -ForegroundColor Yellow
    foreach ($s in $skipped) { Write-Host "   $s" -ForegroundColor DarkYellow }
}

Write-Host ''
Write-Host 'To stop everything, run: powershell -ExecutionPolicy Bypass -File C:\sdi-bridge\stop-all.ps1' -ForegroundColor DarkGray